Pearl White Color
• Color Dry Transfer – No Adhesives
• Look Professionally Installed
• Semi-permanent – Easy Removal
• Blend into neck with low profile
• Easy Installation – Full Instructions
Contains 9 Dots
Rosette Pearl White Fret Dots are manufactured from Chromatec-Letraset, producing an exceptionally clear, durable material. To obtain a professional look;
Please follow the installation guide below!
Cleaning Neck Surface Prior To Application
Gently clean your neck surface area before installation. Use a dry Micro-fiber or cotton cloth. It is important that the finish is free of oils for good contact. If you have used adhesive back dots in the past, it is important to remove the sticky residue. If you are unsure of your instruments finish, avoid cleaners like alcohol.
Installation Of Rosette Silkscreened Fret Markers TIP!
-Your kit contains 9 Pearl/White Dots. To make installa-don positioning easier, you can cut one row of dots with a scissors.
Position your Fret Dot face down on the guitar neck where you desire. Exposed dot face down, backing paper up. Grab a dull pencil or pen to use as a burnishing tool. The pen-cil/pen will also help you see where you have rubbed on the back side.
Gently rub the back side of the dot . You will see the dot sepa-rate from the mount paper. DO NOT PRESS HARD! Slowly peel away the backer paper. The process will go very fast.
As a final step, take the translucent paper and gently burnish the Pearl White Dot to increase the surface connection.
Important! Store your extra Fret Dots with Burnishing Paper Covering The Exposed Dots Attaching Side. Removal If Desired Because no adhesives are used, Rosette Dots will not harm your finish. To remove, gently scrape with your fingernail, then clean area with clean cloth.
Research For Better Guitars
Products can be found here:
https://www.rosetteguitarproducts.com/
Classical Guitar